Phil's Chandlery

What do you need to go with that new rudder or centerboard?  

We keep a full selection of rudder and transom fittings, as well as headstocks, tillers, and other related gear.

If its shown here, its typically in stock.  And you won't find lower prices in North America!

If  you need a special item that's not listed, we can probably get it by the time your foil order is ready.

All prices are in Canadian Dollars  and do not include shipping or taxes.  Handling charge of $5 applies on all orders under $25.

Sorry - no online ordering in place.  Email phil@philsfoils.com or phone 613-599-6951 with your order.  

   
Tiller tubing

Anodized aluminum tubing in stock.  0.065" wall thickness. 

1.25" diameter: $5.50 per foot.  

1.50" diameter: $6.50 per foot.

Sold in increments of 6".

Need a custom carbon tiller?  Look here!

Centerboard Shims

Got a sloppy fit? Fabricated in-house, these fiberglass laminates are the coolest centerboard shims you'll find.  They have a low friction glossy outer surface with a graphite/epoxy finish, and a textured bonding surface.  Glue on with contact cement or similar (good idea to dry fit it first).  Sold in 12" x 12" squares.

thickness 1mm 1.5mm 2mm
price ($CDN) $15 $20 $25

outside surface

bonding surface

 
  

Adjustable cleat releases when you hit bottom!
CL257 Hold down cleat for rudder or centerboard $20

Schaefer stainless fittings for small keelboats (1/2"  12.7mm pin)

S81-43 transom gudgeon $50
S80-56 upper rudder pintle $40
S80-55 lower rudder pintle $45

 

Phil's Foils stocks the following RWO aluminum fittings with 3/8"  (9.5mm) stainless pins.
R0737 transom gudgeon (4 hole) $20
R0747 transom pintle (4 hole) $26
R3711 25mm rudder gudgeon - short strap (2 hole mounting) $25
R3712 30mm rudder gudgeon - short strap (2 hole mounting) $26
R3751 25mm rudder pintle - short strap  (2 hole mounting) $31
R3752 30mm rudder pintle - short strap (2 hole mounting) $32
R3753 38mm rudder pintle - short strap (2 hole mounting) $42
R3763 38mm rudder pintle - long strap (3 hole mounting) $43
R3773 38mm rudder gudgeon - short strap (2 hole mounting) $30
R3783 38mm rudder gudgeon - long strap (3 hole mounting) $31

RUDDER PINS

Upper pin is RWO stainless pin 5/16" (8mm) diameter.

Lower pin is aluminum alloy 7075 (high strength, high corrosion resistance) for those that don't quite need the strength of a stainless steel pin and want to save a bit of weight. 
R0754 RWO rudder pin, 250mm long, 8mm diameter $24
PF300 Aluminum 7075 rudder pin, 300mm long, 8mm diameter $18

 

Sea Sure Aluminum Rudder Fittings (5/16" / 8mm stainless pins)

38mm fittings also in stock but not shown
 Sea Sure rudder fittings are known for their strength and quality.  5/16" pins (8mm)
SS18-00  top rudder gudgeon, 2-hole mounting, 25 mm $18
SS18-01  top rudder pintle, 2-hole mounting, 25 mm $30
SS18-02  bottom rudder gudgeon, 3-hole mounting, 25 mm $21
SS18-03  bottom rudder pintle, 3-hole mounting, 25 mm $36
SS18-04  top rudder gudgeon, 2-hole mounting, 38mm $25
SS18-05  top rudder pintle, 2-hole mounting, 38mm $37
SS18-06  bottom rudder gudgeon, 3-hole mounting, 38mm $25
SS18-07  bottom rudder pintle, 3-hole mounting, 38mm $42
SS18-43  top rudder gudgeon, 2-hole mounting, 32 mm $23
SS18-44  top rudder pintle, 2-hole mounting, 32 mm $36
SS18-45  bottom rudder gudgeon, 3-hole mounting, 32 mm $33
SS18-46  bottom rudder pintle, 3-hole mounting, 32 mm $40
 

Transom Fittings

 
SS18-12  top transom gudgeon, 2-hole mounting, 6mm holes $13
SS18-13  top transom pintle, 2-hole mounting $28
SS18-14  bottom transom pintle, 4-hole mounting $27
SS18-15  bottom transom gudgeon, 4-hole mounting, 6mm holes $18.5
Also available, by special order:

SS18-16: top transom gudgeon, 2-hole mounting, 5mm holes
SS18-17: lightweight top transom gudgeon, 2-hole mounting, 5mm holes
SS18-18: lightweight top transom pintle, 2-hole mounting, 5mm holes

SS18-12B / SS18-15B / SS18-16B:  as above, but with carbon bushing
 

Packing Pieces and Retaining Clips

 
SS18-19  plastic retaining clip, intended to break if the rudder hits bottom $1.25
SS18-20  0.6mm stainless steel rudder retaining clip $3.50
SS18-21  1.0mm stainless steel rudder retaining clip $4.75
SS18-30  1.8 mm 3-hole packing piece 
 (for tight fit between blade and rudder fitting)		 $2.00
SS18-31  3.2mm 3-hole packing piece $2.00
SS18-35  1.8mm 2-hole packing piece $2.00
SS18-36  3.2mm 2-hole packing piece $2.00
SS18-52  5mm 2-hole transom fitting packing piece $2.75
SS18-54  5mm 4-hole transom fitting packing piece $3.00
HEADSTOCKS

 

Sea Sure "Simplex" headstocks.  Tough and lightweight stocks of anodised aluminium.  Come complete with upper pintle, lower gudgeon, tiller, and hold-down cleat.  5/16" (8mm) pintles.
Item Description Price
SS23-88  20mm blade thickness, silver anodised $265
SS23-90  20mm blade thickness, black anodised $265
SS23-92  25mm blade thickness, silver anodised $265
SS23-94  25mm blade thickness, black anodised $265
SS23-96  32mm blade thickness, silver anodised $265
SS23-98  32mm blade thickness, black anodised $265

Telescopic Tiller Extensions

Sea Sure aluminum telescopic tiller extensions, complete with universal joint.
SS23-70A  71 to 102 cm length $65
SS23-70B  81 to 123 cm length $75
SS23-70C  102 to 163 cm length $85

Sea Sure Aluminum Tiller Extensions

 
Aluminum with long ribbed handle and a composite universal joint.
SS23-32A  61 cm length $45
SS23-32B  110 cm length $52
SS23-32C  120 cm length $54
SS23-32D  130 cm length $56
SS23-32E  210 cm length $62
SS23-32F  220 cm length $64
Want any of the above in carbon?  Please enquire.

TEK MARINE 22mm carbon tiller extensions.

  • Fantastic hoop strength, will not shatter.

  • Reinforced end for flexi joint with machine screw fixing.

  • Extremely stiff ergonomic 22mm diameter tube.

 

We've brought in the 1.2m length to trial for interest.
TEKML1.2  120 cm length $112
 Other sizes available right up to 3m.    Let us know if you're interested.
 

Universal Joint

 
SS23-77  composite universal joint $10
SS23-41  saddle for fitting universal to 1" tube $1
SS23-43  saddle for fitting universal to 1.25" tube $1
 

Centerboard guards

Slips on to protect the sharp trailing edge
TEKFPCB 470  Intended for the Int'l 470 class, at 82 cm in length will fit other boats as well. $14
TEKFPCB 420 Same as above, but for 420 class.  89 cm in length. $14

 


Copyright © 2002-2007 Phil's Foils & Composites. All rights reserved.
Revised: December 31, 2007