Stiletto 27*


Please take a moment to read about Standard Finishes and Options, and How to Order.

Design: St27CB  
Centerboard

This high performance replacement is longer than the original, measuring in at 8' in total length.

The rectangular head is suited for the stock mounting position.  Alternatively you may order this with a foil section that extends the length of the centerboard (recommended) to use with modified brackets for reducing the point load on the foil when partially raised (or for in-hull mounting).   You may also specify a different length if you wish.

To balance the strength/weight/cost equation this board is made in red cedar with carbon fiber unidirectionals, and fiberglass skin. Finished weight is in the low 30s (pounds).  Not intended to be used at full length in a strong breeze - when the wind comes up, so should the board.

* Stiletto 27 is a trademarked name of Stiletto Catamarans.  Phil's Foils does not have any affiliation with Stiletto Catamarans.

Three daggerboards at various stages of completion.  Note that on the left the customer requested a taper be cut on the leading edge of the head.  The one at right is done in carbon skins (add $200) for a little extra insurance.



Copyright © 2002-2004 Phil's Foils & Composites. All rights reserved.
Revised: September 30, 2004